Edwards Vacuum

Use a BX bakeout band to increase the rate of degassing of the pump body to achieve faster pump down and lower ultimate pressure. Bakeout bands are normally fitted to CF flanged pumps intended for use in ultra high vacuum systems. A bakeout band may also be used to protect C-model pumps from condensation of contaminants. Bakeout bands are available for use with 110-120 or 220-240 V a.c. electrical supplies and can be powered from a rear panel socket on the EXC Controller. They are supplied with 3 m cable and mating CE22 connector.

Use a BX bakeout band to increase the rate of degassing of the pump body to achieve faster pump down and lower ultimate pressure. Bakeout bands are normally fitted to CF flanged pumps intended for use in ultra high vacuum systems. A bakeout band may also be used to protect C-model pumps from condensation of contaminants. Bakeout bands are available for use with 110-120 or 220-240 V a.c. electrical supplies and can be powered from a rear panel socket on the EXC Controller. They are supplied with 3 m cable and mating CE22 connector.

Use a BX bakeout band to increase the rate of degassing of the pump body to achieve faster pump down and lower ultimate pressure. Bakeout bands are normally fitted to CF flanged pumps intended for use in ultra high vacuum systems. A bakeout band may also be used to protect C-model pumps from condensation of contaminants. Bakeout bands are available for use with 110-120 or 220-240 V a.c. electrical supplies and can be powered from a rear panel socket on the EXC Controller. They are supplied with 3 m cable and mating CE22 connector.

Use a BX bakeout band to increase the rate of degassing of the pump body to achieve faster pump down and lower ultimate pressure. Bakeout bands are normally fitted to CF flanged pumps intended for use in ultra high vacuum systems. A bakeout band may also be used to protect C-model pumps from condensation of contaminants. Bakeout bands are available for use with 110-120 or 220-240 V a.c. electrical supplies and can be powered from a rear panel socket on the EXC Controller. They are supplied with 3 m cable and mating CE22 connector.

The adapter kit allows the conversion of a standard nXDS20i pump into an nXDS-C version. The kit contains Chemraz® exhaust,bypass, and gas ballast valves and stainless steel inlet and exhaust fitting.

The adapter kit allows the conversion of a standard nXDS20i pump into an nXDS-C version. The kit contains Chemraz® exhaust,bypass, and gas ballast valves and stainless steel inlet and exhaust fitting.

A48015137 Condenser for D-LAB Diaphragm Pumps (supplied with fittings for attachment to the baseplate).

Separator for D-LAB Diaphragm Pumps (supplied with fittings for attachment to the baseplate).

A vibration isolator can be fitted to the inlet-flange of the EXT pump to reduce the transmission of the small amount of vibration generated by the pump to your vacuum system. The vibration isolator has two flanges separated by a flexible stainless steel bellows and an outer rubber anti-vibration collar. The vibration isolator is designed for use with vertically mounted pumps only.

A vibration isolator can be fitted to the inlet-flange of the EXT pump to reduce the transmission of the small amount of vibration generated by the pump to your vacuum system. The vibration isolator has two flanges separated by a flexible stainless steel bellows and an outer rubber anti-vibration collar. The vibration isolator is designed for use with vertically mounted pumps only.

A vibration isolator can be fitted to the inlet-flange of the EXT pump to reduce the transmission of the small amount of vibration generated by the pump to your vacuum system. The vibration isolator has two flanges separated by a flexible stainless steel bellows and an outer rubber anti-vibration collar. The vibration isolator is designed for use with vertically mounted pumps only.

A vibration isolator can be fitted to the inlet-flange of the EXT pump to reduce the transmission of the small amount of vibration generated by the pump to your vacuum system. The vibration isolator has two flanges separated by a flexible stainless steel bellows and an outer rubber anti-vibration collar. The vibration isolator is designed for use with vertically mounted pumps only.