MBRAUN Spares And Parts
Current feedthrough with perforated plate (1510414)
Installation by a technician. (Original item number: 1510414)
MB-Ethernet feedthrough (1510415)
For mounting on flange DN40 KF RJ45, CAT 6 Cable with an operating frequency of 250 MHz (Original item number: 1500452, 7138251)
MB-USB feedthrough B/A (1510416)
For mounting on flange DN40KF USB 2.0 cable entry (1.8 m) Inside: Plug Standard B (male) Outside: Plug Standard A (male) (cable length inside glovebox approx. 1 m) (Original item number: 1500444)
Feedthrough BNC, 2-pin, double-sided (1510418)
For mounting on flange DN40KF Application: low frequency, low voltage Max. voltage: 50 V AC Current carrying capacity: 0.1 A Frequency range: up to 10 MHz Impedance: 50 Ohm Shielding; yes, through flange connection (Original item number: 1500461)
MB-ED-DATA-12 Cable feedthrough (1510420)
For mounting on flange DN40 KF Single shielded 12-pole cable (12x0,25mm
MB-ED-DATA-36 Cable feedthrough (1510421)
For mounting on flange DN40 KF Single shielded 36-pole cable (36x0,14mm
MB-ED-400-16 Power feedthrough (1510423)
For mounting on flange DN40KF Power feedthrough: 400V/16A/3Ph Cable length: Outside: 3,5m - Inside 1,5m (Original item number: 1500440)
MB-ED-400-25 Power feedthrough (1510424)
For mounting on flange DN40KF Power feedthrough: 400V/25A/3Ph Cable length: Outside: 3,5m - Inside 1,5m (Original item number: 1500441)
MB-ED-115-24 Power feedthrough (1510425)
For mounting on flange DN40KF Power feedthrough: 115V/24A/1Ph Cable length: Outside: 3,5m - Inside 1,5m (Original item number: 1500442)
MB-ED-208-20 Power feedthrough (1510426)
For mounting on flange DN40KF Power feedthrough: 208V/20A/3Ph Cable length: Outside: 3,5m - Inside 1,5m (Original item number: 1500443)
Bulkhead fitting DN4 with O-ring (1510431)
For 6mm tubes (Original item number: 7002254)
O-ring seal
Flowmeter with check valve for regeneration gas (1510500)
Flowmeter assembled with check valve and screw-in fitting. Suitable for: - LMF reg. - RKM Glass flow meter, art. 1510511, has the same sizes and can therefore be exchanged. (Original item number: 2600027)
Flow meter for regeneration gas (1510501)
Flow meter and screw-in fitting. Suitable for: - LMF reg. - RKM (Original item number: 3240052)
Position detector for angle valve EPV40 (1510504)
Consisting of: Control valve, coil, gasket, connection leads (Original item number: 2600256)
Pressure gauge -1/0 bar, bottom connection (1510505)
Suitable for: - vacuum antechamber without external refill - Main antechamber (Original item number: 2405004)